according to DIN
Taktiplast GPA6 verlegt nach DIN Norm

Tactily, palpably and contrastily designed floor guidance systems are addressed to blind and visually impaired persons. By the perception of markings with the feet or the white cane as well as through a colour contrast with the remaining floor surface, blind and visually impaired persons can move autonomously, independently and freely.

Furthermore, tactile floor guidance systems also offer a valuable and easy orientation help for persons without disability.

The tactile guidance systems of TaktiFloor according to the DIN-Norm are manufactured from high-quality, long-living, UV-resistant and glass fibre reinforced Polyurethane and are available in different versions.

They are designed so that they can likewise meet the often very different demands of architects, planners, renters and users.

Here, we have provided all information on the Taktiplast guidance systems (GPA 6) according to DIN-Norm for you in this info folder for download.

Product details

Taktiplast ribs

Taktiplast ribs

Rippenelemente Taktiplast GPA6 nach DIN Vorder- und Rückseite mit Klebestreifen

Our ribs are equipped with double-sided adhesive tapes. They aren't conventional adhesive tapes but so-called VHB adhesive tapes, which can be actually described as a hardened glue and can be used in areas where an extremely high adhesive strength is needed, as for example at the adhesion of glass fronts at high-rise buildings, the adhesion of wing parts in the aviation industry or the adhesion of add-on parts in the car industry.

Additional adhesive layers with the two-component and high-strength special glue, developed by us for the tactile guidance system GPA 6, guarantee the torsional strength and shear strength that are necessary for a flawless adhesion.

The measures in detail:

The cross section is trapezoid.

Length:285 mm
Width below:12 mm
Width above:8 mm
Height:3 mm

The colours:

The standard colours cream white, anthracite grey and traffic grey are always in stock and can be delivered to you within a few days.

  • Cream white (RAL 9001)
  • Anthracite grey (RAL 7016)
  • Traffic grey (RAL 7042)

Of course, we can also produce every other colour for you. There are no limits set for your wishes. Depending on the colour, different minimum order amounts exist though.

We have provided all information about the Taktiplast guidance system GPA 6 according DIN Norm in an info folder for you.

 

Taktiplast knobs

Taktiplast knobs

Taktiplast Noppen GPA6 nach DIN in vier Farben

Our knobs are equipped with double-sided adhesive tapes. They aren't conventional adhesive tapes but so-called VHB adhesive tapes, which can be actually described as a hardened glue and can be used in areas where an extremely high adhesive strength is needed, as for example at the adhesion of glass fronts at high-rise buildings, the adhesion of wing parts in the aviation industry or the adhesion of add-on parts in the car industry.

 

Due to the already applied adhesive tape, the knob underside is dense and dirt-repellent. An adhesive point, applied in the middle of the knob with our two-component and high-strength special glue, guarantee a reliable adhesion even on carpeted floors!

The measures in detail:

Spherical calotte with bevel

Basic diameter:25 mm
Height:4 mm

The colours:

The standard colours cream white, anthracite grey, traffic grey, red brown, red, yellow, green and blew are always in stock and can be delivered to you within a few days.

  • Cream white (RAL 9001)
  • Anthracite grey (RAL 7016)
  • Traffic grey (RAL 7042)
  • Red brown (RAL 8012)
  • Red (RAL 3003 – rubi red)
  • Yellow (RAL 1006 – maize yellow)
  • Green (RAL 6004 – blue green)
  • Blue (RAL 5017 – signal blue)

Of course, we can also produce every other colour for you. There are no limits set for your wishes. Depending on the colour, different minimum order amounts exist though.

We have provided all information about the Taktiplast guidance system GPA 6 according DIN Norm in an info folder for you.

We will gladly send you the info folder!

Simply send us your e-mail and you will receive the info folder directly per e-mail to your postbox from us.

Request the info folder now! 

Taktiplast laying patterns

Taktiplast laying patterns

Through a refined sticking system, our reusable laying patterns can be arranged in a row in length and width so that attention fields and guidance stripes can be produced in grid sizes from 7,5 cm resp. 6,0 cm in almost every wished size.

The measures in detail:

Knobs pattern

Size:400 x 300 mm
Orthogonal distance of the knob centre75,0 mm
Diagonal distance of the knob centre52,5 mm

Rib pattern

Size300 x 300 mm
Vertex distance of the rib centre60,0 mm
Taktiplast installation

Taktiplast installation

Bild Verlegung GPA6 nach DIN auf Treppe

Our perfectly coordinated system of single indicators and patterns guarantees a precise, faultless and extremely fast installation progress, which has a very positive impact on the installation costs.

The Taktiplast ribs are already equipped with double-sided adhesive tapes (self-adhesive) across the half of their underside. Additional partial adhesive lines with our two-component, high-strength special glue on the points pre-marked on the laying patterns guarantee the torsional strength and shear strength that are necessary for a perfect adhesion.

The Taktiplast knobs are also already equipped with an adhesive ring at the knob underside on delivery. This edge adhesion grants a circumferential tightness, whereby dirty areas can't be formed under the knobs. A reliable adhesion is guaranteed by an adhesive point, which is additionally applied at the knob centre during the installation with our two-component, high-strength special glue.

This additional adhesion of the ribs and knobs even provides a reliable adhesion on carpeted floors.

For the self-installation, you receive from us:

  • The number of rib indicators and knob indicators required by you. In our info folder, you can find the calculation table that will allow you to determine the needed amount by yourself. But, we are also happy to help you with the calculation.
  • The necessary amount of laying patterns for rib indicators and knob indicators (which results from the total number of ordered indicators).
  • The appropriate amount of two-component, high-strength special glue in 50 ml cartridges with enough mixing tubes
  • A system compatible dispensing gun
  • An installation guide with processing instructions and other general information (processing temperature, subsurface texture and cleaning, etc.)

If you prefer to let our laying expert perform the installation, we are happy to make you an offer therefor.

Just call us! (Tel.: +43 732 27 37 00)

Or send us an e-mail

We are always here for you and are happy to help you!

Request an offer now!

© All rights reserved