P-Loop 2.0

Portable loop system for areas up to 150m2


Mobile accessibility!

Our view is that a portable loop System should be of equal listening quality as a fixed installed loop System.
The performance of the Univox P-Loop 2.0 matches that of any Professional Univox loop amplifier in terms of field strength and sound quality. No matter if you use a portable or a fixed loop System, the expectations of its performance should be the same. Its as simple as that.
Univox P-Loop 2.0 has everything that you as a venue owner or a meeting organizer need set up a Professional multi purpose loop System. You will have a mobile System on stand-by that fulfil any demand for accessibility that matches or even surpasses the expectations of your hard of hearing guests.
The P-Loop case is equipped with an advanced, yet compact built-in loop amplifier and a 35 meter loop cable which is easy to pull out from its dispenser and to reload again. A 15 meter extension cable and a Univox loop receiver are also included.
The case can be supplied with a Professional built-in wireless microphone System with different microphone options.
Other audio sources can also be connected to either of two phantom powered XLR inputs or an RCA line input. The output Signal may also be tapped to external audio equipment via the line out RCA connector.
Our unique Univox dual action AGC control, with extremely fast attack and release time and regulating output AGC, supplies a stable sound with very clear speech perception even in difficult sound environments.
Univox P-Loop 2.0 is compliant with the field strength level demands set by the IEC 60118-4 for loops covering up to 150m2.



  • State of the art loop technology
  • Roller case with sturdy wheel design and telescopic handle
  • Dual action AGC for high quality sound
  • Two XLR inputs for microphone/line
  • RCA line input
  • RCA line output
  • LED indicators for mains power, input level and loop current
  • Automatic resettable fuse
  • High output current
  • Short-circuit proof
  • Wireless microphone options



  • Hotels
  • Conference centres 
  • Exhibition halls 
  • Schools 
  • Office buildings 
  • Hard of hearing organizations 
  • Temporary event venues


Technical data

Mains power  110-240V AC/12-24V DC
Cover area  Up to 150m2 
Loop connection  6.35mm 
Loop output

Max current
Max voltage
Frequency range

70-5000Hz +/-3dB
< 1%


Mic (left)
Line (right)


XLR: 1.5-185mVrms (phantom power 24V)
XLR: 45mV-5Vrms
RCA 75mV-10V

Dual action AGC

Dynamic range
Attack time
Release time


Manual ControlsXLR(Mic/Line) input Controls and loop current output control  
LED Indicators

Mains connection 
Loop current
Input level




Physical data


450x460x195mm (HxWxD)

© All rights reserved